☆NEW Item Release Commemoration Campaign☆ Limited-Time Discount Price!! ★New Jimny Nomad★ ★Further Evolution★ Shortened to the limit for a completely clear view! ★Black★ JC74W Jimny Nomad JC74 Room Mirror Short Stay 32mm Upward This is a part that dramatically improves the narrow forward visibility, which is a drawback of the Jimny. By raising the room mirror 32mm, the field of vision widens, providing a sense of openness and safety♪ Also, the mirror is less noticeable from the outside, resulting in a smart style♪ You can use the original mirror as is just by replacing the stay. JC74W Nomad Exclusive ※ To ensure usability even in a hot car interior in summer, it is made with a 3D printer using high-quality ABS filament that is resistant to heat and impact. 【How to Replace】 ① Remove the cover at the base of the mirror with an interior panel remover or clip remover so as not to scratch the interior. ② Remove the two screws at the base of the original stay with a size 3 Phillips screwdriver (if you only have a size 2, press the screwdriver firmly and be careful not to strip the screw heads). ③ After loosening the screw in the hole on the back of the mirror, hold the mirror part and the original stay firmly and pull them out. (If it doesn't come off, it's easier to remove by warming the connection between the mirror and the stay with a hair dryer, etc.) ④ Connect the short stay to the mirror. (If it is difficult to insert, warm the area around the mirror hole with a hair dryer, etc., to make it easier to insert) ⑤ Securely fix the stay with the two screws. ⑥ Close the screw in the mirror hole. (If it is loose, tighten the screw firmly and adjust) ⑦ Put the cover back on and adjust to a position that is easy to see. ※ Please be careful not to get injured during the work. #Jimny #Nomad #JC74 #RoomMirror #Short #Stay #JIMNY