SUMI Guitar Parts offers high-quality products that "meet a certain level of quality," drawing on the experience of working at a musical instrument store and guitar construction & repair. This is a bushing to fix the bridge (preventing it from moving back and forth) for Jazzmaster, Jaguar, Mustang, and other guitars. "1 set (2 bushings)" The sizes are: 6.5mm diameter on the bridge post side, 8mm diameter on the anchor side, 13mm diameter on the flange, and 1.5mm thickness of the flange. Notes: Some guitars may fit these bushings easily, while others may not fit quite right (too tight or too loose). If they don't fit, please try the following: If too tight: ・Apply lubricant to the bushing and bridge post, etc. If too loose: ・Wrap masking tape around the bridge post, etc. *We cannot be responsible for installation issues due to the guitar's own precision (individual differences). For example, on guitars where the bridge hole on the pickguard side and the bridge hole position on the guitar body side are significantly misaligned, the flange of the bushing may interfere with the pickguard and not install properly (it may be possible to install it by shaving the flange). *Please be sure to check the dimensions of your guitar's bridge carefully before purchasing. Shipping is free and will be via Yu-Packet (postal delivery with tracking service) only. *We cannot accept requests for other shipping methods without tracking services to prevent mutual trouble.