Please read the self-introduction section before purchasing (❁ᴗ͈ˬᴗ͈) This product is used by attaching an acrylic plate with the adhesive gel tape included with the metal striking tool shown in the third image. The large seating surface makes it easy to press. ※ The adhesive gel tape can be cut with scissors. ⚫️ Set Contents Striking tool x 1 Adhesive gel tape x 1 roll Acrylic plate x 1 ★ Striking Tool Size Seating surface: 7 cm x 7 cm Height: Approximately 7.5 cm (with a few millimeters of error) ○ Diameter: 8.3 mm A convenient tool for cutting dies and stamping, etc. When used for leathercraft, it can be used with a hand press machine to press onto leather for stamping or punching. When using with a drill chuck, it has a major axis of 8.3 mm, so please use a 13 mm chuck. ★ Usage Notes ※ When pressing, if you are pressing something larger than the seating surface, or if the design will deform the seating surface, please place an acrylic plate or iron plate in between to enlarge the seating surface. ★ Request ※ Please understand that the striking tool is metal and may have small scratches that do not affect its use. #Leathercraft #DiamondAwl #Stamping #Punch #DieCutting #GenuineLeather #HandPress