Thank you for viewing! Kyosho Mini Inferno, converted to a brushless motor, with electronics. Includes carbon and aluminum options, with quite a few upgrades. I don't remember the specifics. Includes a 2S 7.4V 1500mAh LiPo battery and a LiPo charger (although not pictured, a USB charger is usable and will be included as a bonus). Receiver not included. You can run it immediately if you have a receiver and transmitter. The battery case has been modified, so batteries up to 73 x 34 x 18.5mm will fit. (The battery in the picture is quite small.) It has been stored for a long time, but I recently serviced it and ran it a bit. Operation was not a problem. The motor fan was spinning, but it might not be working well, so you can ignore it (it was added for appearance only). Ride height can be easily adjusted with a hex wrench. On-road tires. You might want to glue the slipper clutch. There are scratches etc. from running. Because it's a 1/18 scale brushless, it's reasonably fast and fun. The ESC will work with 3S, but you'll need to lower the end points or the gears will be damaged. Here is the normal instruction manual (parts list): https://www.kyosho.com/jpn/support/instructionmanual/half8/pdf/30125_MINI_INFERNO%20IM.pdf Tires, receiver, and parts are available on Mercari, etc. Thank you for your consideration!