Get it while it's cheap! This is a humbucker pickup with a natural sustain, known for its Alnico 2 magnets and authentic nickel-silver plate specifications. It has short legs and a 4-conductor cable for versatility. This is an outlet pickup I purchased for maintenance. I have extras, so I'm selling them. ※The images are samples. The cable color and appearance may vary. If the cable insulation is damaged, it may be protected with heat shrink tubing, so please be aware of this. Although it is unused, it is an outlet item, and may have scratches, dents, rust, chips, peeling, paint lifting, uneven finishing, etc., due to transportation, storage, or manufacturing. Please do not purchase if you are looking for a pristine item. I find them useful because they are cheap and reasonably functional. The resistance value varies depending on the lot, so please inquire if you have specific requirements. There will always be some error. Screws and springs are included. ※Installation of pickups and other components is considered a modification and is at your own risk. We do not provide after-sales support for wiring. Wiring diagrams and boxes are not included. Regarding the four-conductor cable, the cold wire is connected to the ground, and the tap wires are connected to each other, with the single wire being the hot wire. Sometimes they are connected in parallel, so we check the phase and match it, but if it's different or if you're combining it with other pickups, please adjust the phase before using. As these are imported goods, the purchase price and individual specifications will vary depending on the time of acquisition, so the images are samples and the exact same item may not be delivered, and the price may also fluctuate. Please do not purchase if you are concerned about minor details such as "it used to be like this," and we will not accept returns for minor issues unless the item is unusable. The color of the cable, cord, and other parts may change at any time. If the length is insufficient, please add to it. Please ask questions beforehand and make sure you understand the product before purchasing regarding details such as whether the pole pieces protrude from the back, their length, etc. Some adjustable pole pieces may not have screw threads, so height adjustment may only be possible by pushing from the front and back. The ears for attaching the screws may bend during shipping, but they can be bent back, so please correct them yourself before using. Metal will break if bent repeatedly. For covered pickups, the solder that holds the cover and base plate together may come loose during shipping, so please reattach it.