⚠️ Each cable is made to order. Please allow 1-2 days for production after purchase. ⚠️ Cable colors may be white or black. ⚠️ This is a SCART cable and is NOT compatible with RGBJP21 (Japanese standard). Please be especially careful if using with a Framemeister. (RETROTINK 5x, OSSC, and GBSC are compatible.) This cable is made using used UL20276 material. While I select clean materials, there may be some signs of use. This is an RGB cable for the Super Famicom. It can also be used with RGB-modded Nintendo 64 consoles. The length is approximately 1.5-1.8m. RGB Cable Features: * SCART configuration * RGBS video with 4-pin independent shielding * Luma sync * Solid ground plane processing on a dedicated circuit board * Separate grounds for video and other signals * Designed following the circuit of the original Nintendo RGB cable * UL20276 material Independent video shielding: * Helps maintain characteristic impedance * Reduces blurring, ghosting, and bleeding caused by crosstalk and signal reflection Luma sync: * Effective in suppressing diagonal noise caused by composite video To illustrate the effect, imagine using a high-quality converter like the RETROTINK 5X. You'll get rich colors and image quality similar to running an emulator on a PC screen. This cable does not color the image (e.g., by including a separate amplifier). It's simple, high-quality, and efficient. It's useful to have a reference cable when evaluating consoles. Because it uses Luma for sync, it is NOT compatible with the SNES Jr., which does not have S-video output. This cable has the same specifications as the one included with the "1chip Super Famicom." Thank you for your interest.