This is a small parts case (PTC1) for Mini 4WD cars, made with a 3D printer. It's designed to fit perfectly in the drawer trays of a pit box. I made this with meticulous attention to detail for my own use, but I'm offering it to those who need it. * Set of 2 cases * Top lids can be freely chosen from 4 colors (black/gray/blue/red-brown) Meiho Trendy and Kyosho pit boxes are the de facto standard for Mini 4WD racers, but I find the tray dividers to be somewhat inadequate, making them a little difficult to use. In particular, commercially available small parts cases don't fit well... so I made this small parts case. <Features of PTC1> * Made with generous use of PETG-CF filament. * The shape is designed to fit the middle drawer, and it can be secured with the tray dividers. It also has a unique structure that allows for smooth removal from the tray. * The cases can be stacked, significantly improving storage efficiency. * The lid is a sliding type with a locking function, so the contents won't fall out. * The lid surface has a non-slip recess. * Can be used within the tray. (Achieved with divider fixation + sliding lid + surface non-slip) * The inside of the case is divided into 4 compartments. The inner dimensions are 47.8 x 25.6 x 13.4mm, accommodating many small parts. Screws/nuts/washers, mass dampers/gears, rollers (19mm rollers, 13mm 2-stage rollers), cut brake sponges, Pera tires/narrow wheels, small tools, etc. <Storage examples in the pit box> * Top section Can be stored vertically. Relatively slim, so it can be stored in a small space. * Upper drawer Stackable in 2 layers. Maximum storage: 12 * Middle drawer Best match for 2 cases each on the left and right. Can also be laid out in other ways. Stackable in 2 layers. Maximum storage: 14 * Lower drawer Stackable in 4 layers. Can be stored horizontally. Maximum storage: 39 * Also compatible with Tamiya Portable Pit * Please check the photos for other specifications and conditions. * Only the two small parts cases in the second photo will be sent. (Photos are examples) Since this is made with a 3D printer, there may be individual differences such as layer lines and localized unevenness. Please refrain from bidding if you are extremely sensitive to the appearance. Returns and support are not available. Please understand this before bidding. ■ Also listed elsewhere. Please understand if it sells out due to timing.