Exterior Parts Seam and parting line removal → Surfacer → Finisher's Foundation White → Clear coat → Decal application → Clear coat → Intermediate sanding → Clear coat → Light compound polishing → Wax finish All cowls and the tank can be removed. Please handle them at your own risk. * Platz genuine detail-up parts used * Under cowl attachment changed from a peg-and-hole type to attachment with 6 extremely small flat-head screws (3 places on each side) * Swing arm reinforced with polyester putty * Rivets replaced with metal ones * F.R brake lines replaced with mesh type * Clutch and throttle cables replaced with thinner types * Exhaust device wire added * Tank air vent added * Throttle cable tensioner added (self-made) * Radiator breather hose added * Steering grip wire installed * Meter glass-like processing * R master cylinder tube added * Steering damper rod replaced with a metal one * F axle holder bolts replaced with square rivets Completed on 2025.07.06 Please judge the finish from the images. This is a hobbyist's work, so there may be paint imperfections, assembly defects, touch-up repairs, etc. Please understand this, and those seeking a high level of perfection should refrain from purchasing. We will pack the item with the utmost care for shipping, but the buyer is responsible for repairing or restoring any parts that may fall off or be damaged during transportation. Please understand that we cannot accept returns or complaints. Please consider the above before purchasing. Scale: 1/12