【Product Description】 This is an in-car backup monitor compatible with monitors, car navigation systems, etc. It is very small, so it is inconspicuous when installed on a vehicle and does not spoil the details of your car. Also, despite its small size, it has very high image quality, making it an essential piece of equipment for those who are not good at backing up, or those who have vehicles where it is difficult to see behind. The 170° wide-angle view drastically reduces blind spots. It helps prevent unexpected accidents. The angle can be adjusted within a 90° range to achieve the best viewing angle regardless of the vehicle it is installed on. It has a helpful guideline display, making it easy to see the distance, and the waterproof and dustproof performance is IP68, so you can use it with peace of mind for a long time. 【Product Contents】 Small backup camera body x 1 Video cable (approx. 6m) x 1 Power cable (approx. 1m) x 1 Mounting screws x 2 【Installation Method】 To prevent short circuits, disconnect the power connection from the battery. Use the included screws to install the camera in any desired location. The viewing angle can be adjusted. Connect the red line coming out of the camera to the included power cable and connect it to the vehicle's reverse power supply. (e.g., the backup light cable) Connect the yellow line to the video input of the monitor via the video cable. Restore the battery connection, and when you put the gear in reverse, the image will be output to the monitor. Please route the wiring according to your vehicle. 【Product Specifications】 Operating voltage: DC12V Size: Approx. 23mm x Approx. 23mm Signal system: NTSC / PAL Effective pixels: 960 x 576 pixels Viewing angle: 170 degrees Waterproof standard: IP68 Video output: 1.0Vp-p, 75Ω Examples of compatible car navigation systems Pioneer Carrozzeria Panasonic Strada Kenwood Saisoku and many others *Please check if your monitor has a video input. *An adapter may be required depending on the model. *We do not provide any installation support. *We cannot respond to reports of defects after the evaluation has been received or after the product has been processed, so please be sure to test the operation before evaluating the product.