Wheelbase approximately 73.5mm For 1/24 drift radio control cars 3D printed resin comical body With canards and GT wing Printed to be mounted on a TG RACING 1/24 TT chassis in combination with a TG RACING 1/24 1/28 TG First short wheelbase chibi kit. It may also be possible to mount it on a chassis with a wheelbase of about 73mm. Includes body, hood, trunk, doors, front and rear bumpers, mirrors, light parts, windows, lenses, and muffler. No driver's or passenger-side windows. The mechanics are the same as for 1/24 hobby radio control cars (mosquito cars). Mounting may be a little difficult due to the short wheelbase. *Please note that interference may occur depending on the wheel and tire size, settings, etc., so please make adjustments by trimming. Front narrow 1.5, rear wide 3 is a good starting point. *Due to the resin material, there may be slight variations in size during printing, so please handle any necessary adjustments yourself. *Resin is more prone to cracking than plastic models, so please handle with care. (Especially at the connection points of each part) *Windows and lenses: Use waterproof sandpaper #600 - #800 - #1000 *The chassis, tires, and wheels in the images are not included. *Please purchase only if you understand that this is a 3D printed body. *Cut off any unnecessary parts. Do not use nippers (they will crack), but instead use a small rotary tool, file, or ultrasonic cutter to cut or trim.