Galaxy S23 Film Hydrogel material film. This film is very beautifully applied using the included spatula. This is a soft film with a blue light cut finish that is gentle on the eyes. Thin, durable, and elastic, it absorbs impacts. It is much thinner than glass, so there is no interference with the case. If you are looking for other types → #kiriGalaxyS23 Compatible models: Galaxy S23 5G (SC-51D / SCG19) Accessories: Wet sheet, dry sheet, dust removal sticker, application spatula, video QR ★ Immediate purchase without comment is OK. No comment after purchase is also OK. ★ Regular mail delivery is currently not available on weekends and holidays. For those in a hurry or who want to remain anonymous, we will support Mercari delivery for an additional 100 yen, so please contact us before purchasing. ■【Tips for application】■ The film structure is from the top layer: Top layer: Film protection sheet Middle layer: Film body Bottom layer: Adhesive surface protection sheet (white) of the film body Sheet ①: Sheet ① that protects the surface to be temporarily applied 1. Clean the screen of your smartphone. Remove the holes in the film, such as the lens hole. 2. Peel off ① and align it with your smartphone. This is a temporary application. At this time, it's okay if air gets in. You can reapply it as many times as you like. Reapply as many times as you are satisfied. ★ This is where the quality changes ★ At this time, you can touch the adhesive surface of the film with your hands. 3. This is the real thing. Lift the film from the bottom of the smartphone (USB port side) about 5cm and Peel off the bottom layer sheet while applying it with the spatula all at once. No force is required. 4. Raise the remaining bottom layer (white) sheet on the opposite side to 90°. At this time, it will feel like you are peeling off the temporarily applied part. 5. Peel off the bottom layer sheet as before and apply it with the spatula all at once. 6. In this state, finish the four sides of the smartphone to some extent with the spatula. First, attach the edges outward. Do the straight lines along the edges of the smartphone later. If you do it first, air may not escape. 7. Finally, pinch the top of the lens and peel off the top layer sheet, and you're done. 8. Even if there are streaks of about 3cm on the film, they will disappear over time. Please refer to the video together.