⚪︎ Features (Based on the photos) ・ Length: Approximately 30cm wide, 18cm high, 23cm deep ・ Branch thickness: Thickest part approximately 8cm, thinnest part approximately 4cm ・ Weight: Approximately 953g ⚪︎ Recommendations This driftwood is recommended for those who: ・ Want a thick driftwood that can stand on its own ・ Want driftwood with weight and impact suitable for a vivarium ・ Want driftwood with both thick and thin branches for creatures to play on It features a powerful driftwood approximately 8cm thick with thinner branches of about 4cm. As you can see in the second photo, the thinner branches grow diagonally upwards. It can stand on its own because the main driftwood is thick and the total weight is close to 1kg. This dynamic driftwood can be used for layouts for large creatures. The creatures will not get bored as they can go back and forth between the thick and thin parts. Please consider it! This driftwood was collected from the coast of Niigata Prefecture. Please use it for aquariums, insects, reptiles, vivariums, interior design, and handicrafts. De-tanning treatment has been completed. ⚪︎ Notes ・ As it is a natural product, there may be some scratches, stains, and sand remaining. Therefore, when using it in an aquarium, the water may turn brown. Please be aware of this. ・ Although it has been soaked in water for a month to remove tannins, it has been dried, so please perform the sinking process yourself when using it in an aquarium. ⚪︎ Processing Steps 　　Brush cleaning 　　　　↓ 　　Soaking in baking soda water for one month to remove tannins (Brush cleaning once every 7 days) 　　　　↓ 　　Sun drying (7 days)