Copilot Fx / Broadband Copilot Fx EXP The Copilot Fx Broadband is a splitter processor that allows you to control three expression pedals/CV controls with a single expression pedal or CV control. It broadcasts your foot movements in a broadband manner to many pedals and devices, allowing you to control the parameters of multiple pedals in real-time or distribute CV from a modular synth to many devices. It supports TRS (stereo) connected expression pedals or 0-5V CV. Each output has an individual range knob, allowing you to set the sweep to match the settings of the connected equipment. In addition, the Range switch installed for each output allows you to reverse the minimum position of the pedal. This allows you to set controls that move in the opposite direction depending on the connected equipment. Furthermore, even if no expression pedal or CV is connected, you can operate the EXP/CV knob like an expression pedal. It can also be used in combination with the Copilot Fx Broadcast. Power is supplied by a DC9V center-negative adapter. It does not support battery operation. ● Controls 1. III: Adjusts the range and fine-tunes the pedal position of Expression Out III. 2. II: Adjusts the range and fine-tunes the pedal position of Expression Out II. 3. I: Adjusts the range and fine-tunes the pedal position of Expression Out I. 4. Power: Connects a center-negative DC9V adapter. Current consumption is 20mA. 5. EXP/CV knob: When nothing is connected to the input, you can operate this knob like an expression pedal. 6. Range switch: Switches whether heel down (left) or toe down (right) is the minimum position. Each switch is independent. 7. Output: TRS (stereo) 50kΩ expression output. 8. Input: Expression pedal using a TRS stereo cable, thank you.