cloudlifter cl-1 mic activator Cloud Microphones Cloudlifter CL-1 I was using this, but before listing it, I blew off any debris with an air duster, wiped it with an alcohol wipe, and then wiped it dry with Kimwipes. I am also open to some price negotiation. Immediate purchase is OK. Amplifies the signal of low-output microphones using phantom power! It's useful for maximizing the performance of your microphone. Specifications ■ Microphone Activator ■ 1-channel version ■ Power: Phantom power ■ Input/Output Connectors: Input 1x XLR, Output 1x XLR ■ Size: 47mm, 114mm, 48mm ~From the manufacturer's website~ ・Amplifies the signal of low-output passive microphones up to 25dB using phantom power. ・Phantom current does not flow to the microphone. ・Phantom power is required for use. Microphones with low gain need to have their signal amplified significantly. This is a common problem for engineers. Unfortunately, dynamic microphones, which are said to have the best sound quality, and many ribbon microphones fall into the category of low-output microphones. In such cases, please use Cloud Microphones' 1 / 2 channel microphone activators "CL-1" and "CL-2". It is possible to amplify the microphone signal by 25dB before inputting it into the preamp while keeping it clear, providing a perfect solution in any situation. "CloudLifter CL-1 / CL-2" uses phantom power to increase the gain to the required level. It is also ideal for ribbon microphones. It is also used by live engineers because it can be used to prevent noise picked up by long cables. It has the effect of suppressing noise because it can boost the microphone signal immediately after the sound source, and it is also effective for XLR lines of acoustic guitars. As the title of the microphone activator suggests, using "Cloudlifter CL-1 / CL-2", which breathes new life into dynamic & ribbon microphones, you can benefit in various situations, both live and in the studio. ※ Not compatible with microphones that require phantom power, such as condenser microphones. sm7b ag03