【Uenoko】 Tamiya CC-02 Bump Steer Countermeasure Axle Servo Mount This is a homemade part for the Tamiya CC-02. It allows you to mount the servo directly to the housing. By minimizing alignment changes when the suspension strokes, unnatural snaking is eliminated. Product contents: Main body, mounting bolts & nuts Steering rods are not included. The strength has been increased due to specification changes. Please refer to the photos for detailed installation instructions. It can be used even if you shorten the standard steering rod as much as possible. In that case, the servo horn will tilt slightly. The main body is made of 3D printed UV resin (ABS like). It may be prone to cracking if you use a high-torque servo or engage in aggressive driving. Please be aware of this. Please be careful not to overtighten. We recommend using a servo saver. Installation has been confirmed on the CC02_L size. Installation is also possible on the M size, but you may need to increase the amount of chassis cutting depending on the servo. The S size requires a low-profile servo. Specifications are subject to change without notice. This is a homemade part made as a hobby, so please refrain from purchasing if you are looking for perfection. Please purchase if you understand the characteristics of UV resin and have RC knowledge. I have uploaded a short video on YouTube. If you are interested, please search for it. Note: There are people reselling this product at high prices on Amazon, etc., but they have no connection to me. Thank you.