Motorcycle Vlogging Microphone [Tech's Mic] Dual Mic for GoPro and Others Based on my own experience, I created this microphone with the desire for a product like this. When doing motovlogging, many people want to record the sound from their intercom. In such cases, a microphone splitter is required, or you need to plug in two jacks to record. As a result, the inside of the helmet becomes a mess of wires, and the microphone gets in the way, causing various discomforts. So, I made a microphone that can record two sound sources with a single cable. Furthermore, the microphone itself is 6mm in diameter, so it doesn't feel too intrusive even when placed inside the cheek pads. The flat microphone can be set on top of the speaker, and covering it with a sponge shouldn't be too noticeable. If you have any requests or custom orders, please contact me in the comments. I will try to accommodate them as much as possible. [You can hear the sound when using it] The microphone uses a high-quality microphone. Regarding the sound quality and how it feels to use, I have uploaded a video on YouTube, so please check it there. You can search for "Motorcycle Vlogging Microphone Tech's Mic". I also explain the microphone placement. This is a handmade product that I made. Each one is handmade, so there may be some minor scratches and discrepancies from the photos. Please check the size in the photos. I have checked the operation, but noise may occur depending on the device you are using, so please be aware of this. My equipment used: ・GoPro HERO4 silver ・GoPro HERO7 BLACK ・ZOOM H1 ・SENA 30K (Mesh Intercom) ・Old air-cooled motorcycle I wanted to check it with other devices, but I don't have the means to do so, I apologize. Please consider it for a comfortable motovlogging experience. I repeat, please understand that it is handmade. Please note that I cannot offer a discount.