TRS phone cable, 2.1 to 3m, 1 unit. Uses Oyaide cable (QAC-222) and Amphenol gold-plated plugs. The following changes are possible, please let us know in the comments: 1. Length change You can choose between 2.1m and 3m. 2. Plug change. Either one or both sides can be changed to XLR. XLR uses Neutrik gold-plated plugs. *About the cable Uses Oyaide QAC-222. ~Quoted from the manufacturer's website~ Centered around "HC-OFC," the cable design follows that of the QAC-202. PE (polyethylene) with low dielectric properties is used for the insulator coating the conductor, suppressing the cable's capacitance (electrostatic capacity) to reduce signal transmission loss, resulting in extended high-frequency characteristics. LDPE (low-density polyethylene) is used for the inner sheath covering the insulator. By setting the hardness of the inner sheath differently from the insulator, vibrations transmitted to the cable are effectively suppressed, achieving sharper localization. *About the solder Uses Oyaide SS47-50. ~Quoted from the manufacturer's website~ OYAIDE's audio-specific solder developed with the motto of bringing out the individuality of each part such as cables and connectors. It uses tin with higher purity than regular solder. Furthermore, 4.7% pure silver and 1.7% copper, which has the second highest conductivity after silver, are blended to improve conductivity, maximizing the characteristics of the materials used. *About the length This is the length at the time of cable cutting. Please note that there may be an error of a few centimeters due to manual work. *Other After production, confirmation of operation with a tester, oscilloscope, level meter, etc., will be performed, and shipping will generally take 4 to 7 days. Please note that it may take longer depending on parts availability. Please also check the profile. #mixer #effector #compressor #EQ #sampler #audiointerface #patchbay #speaker #TRSbalancecable #mixer #DJ #synthesizer #YAMAHA #MOTU #SSL #RME #Focuslite #Roland #MPC #KORG #ADAM #MOGAMI #MOGAMI