Purchased new on Amazon. Used a few times and then stored at home. There are some scratches and stains. Please refrain from purchasing if you are concerned about the condition, as this is a used item. The outer box and instruction manual are not included. Only the disc cutter will be shipped. To prevent any problems, cancellations, returns, refunds, or exchanges after purchase are not accepted. Please understand this beforehand. The box will be a reused cardboard box from my home. Please note that we cannot be held responsible for any accidents during shipping. This is a slide-type paper cutter, a "disc cutter." It can cut up to 20 sheets at a time. Instead of a push-down type, it uses a rotary blade, so force is easily applied straight down, and the paper is less likely to shift during cutting. Also, the paper guide with a locking function aligns the paper during cutting. It has a handle for carrying, so you can carry it with one hand. You won't have trouble moving it around in a small office or at home. 【Blade Types】 Round Blade (DCC-28)…Can cut paper in a straight line. Fluorine-coated Blade (K-18)…Same cut as the round blade, but adhesive materials like tape and glue are less likely to stick. Perforating Blade (DCC-29)…Can create tear-off lines for tickets, coupons, etc. 【Cutter Mat】 The cutter mat can be used on the left and right sides, and on both sides, for a total of 4 locations, making it economical. (2 locations x 2 sides) 【Cutting Capacity】 Round blade: Approximately 20 sheets (using 64g/㎡ copy paper, 1.8mm thick) per pass. 【Cutting Width】 430mm (approximately the long side of A3) 【Materials】 Cardboard (up to 1mm thick), soft vinyl (up to 0.8mm thick), hard vinyl (up to 0.4mm thick), PP film (up to 0.4mm thick) When cutting materials other than paper, place PPC paper or similar underneath. Body Size: W284 x L522 x H81mm Body Weight: 1.7kg Materials: ABS, Steel Accessories: Perforating blade (DCC-29) x 1, Empty case for replacement blades x 1