This is a prototype made for myself, and after using it for about a month, there's one thing I've noticed. The opening of the coin pocket is a bit narrow, making it difficult to take out coins. I think it will become easier to handle as the leather softens with age. The bill compartment allows you to take out bills from the side, making it a comfortable design. There are two card pockets on the back of the coin pocket. The free pocket can hold about 20 cards. ◎Product Description◎ This wallet is made from 2mm thick cow oil-tanned leather. It has a bold, rugged feel due to the thick leather, but the design and storage are simple and have a clean look. All hardware is brass. On the front, which is the face of the piece, is a "British 3 Pence Brass Coin, Elizabeth II," a concho that fits comfortably in your fingers and is very easy to close. The brass plate on the back provides satisfaction from any angle, with the leather and brass working together. The zipper is a 42 Talon. This wallet allows you to enjoy the aging of the leather and brass, such as how the leather grain and brass change depending on the user. The last image shows a new tracker wallet made of the same leather and a smart key case used for one year, for reference of the aging process. Please check the other works on the page list. Thank you. ◉Specifications◉ Leather: 1mm thick, bonded, with a 2mm thickness, cow oil-tanned leather Tanning: Vegetable tanning Color: Black Hardware: Brass, Jumper Hook 7050 Hardware Color: Raw Brass Concho: British 3 Pence Brass Coin, Elizabeth II Thread: Black Size: W11.5cm x D10.0cm x H3.0cm Free pocket x 1 Coin pocket x 1 Card pocket x 2 Bill compartment x 1 #TrackerWallet #RiderWallet #BifoldWallet #NumeLeather #Handmade *Concho*Americas #Brass #Gift