SUMI Guitar Parts leverages experience from working at musical instrument stores and guitar construction & repair to offer high-quality products that "clear a certain level of quality." "SUMI Pickups are handmade, with each part assembled and wound with care and time (Made in Japan)." This is a P90-type pickup specifically for the front position, using Alnico V pole pieces (magnets) (similar to the pickup structure of Fender-style pickups). If you want a set with a rear pickup, please contact us in advance (however, we may sometimes list sets, in which case please purchase those). * Plain enamel wire (AWG42) is used for the coil wire. * The sound is designed to reduce the muddiness of the low frequencies compared to standard P90s, and to provide good high-frequency clarity. The output is set lower by reducing the number of coil windings, resulting in a more delicate specification. * It's good for installation in Gibson-style guitars, but it's also recommended for the front of a Telecaster, etc. * 2-core shielded wire (made by Gavitt) is used for the wiring to accommodate phase differences with the rear pickup. * Wire the shielded wire to the back of the POT (ground), and connect the white and black wires to HOT (the one that matches the phase of the rear pickup in the guitar you are installing it in) and the other to ground (see image 3). ※ This is the pickup body only. Pickup covers, mounting screws, etc. are not included, so please prepare your preferred cover and screws. Please select a pickup cover pitch of "50mm". (Some manufacturers may list the pitch as "10mm") Specifications Wire: Plain enamel AWG42 Winding: CW (clockwise direction) Magnet: Alnico V Magnetic Pole: North-Top DC Resistance: Around 6.2k (±5%) Inductance: Around 2.9H Wiring Length: Approximately 44cm ※ Resistance and inductance values are reference values. Shipping will be done in a Yu-Packet Post dedicated box (postal delivery) ※ We will send it after checking the sound. \#Soapbar \#Les Paul \#Telecaster