I'm listing this item because I found it in stock. There are some paint unevenness. I have improved the pedal riser that raises the height of effectors. The conventional product only allows cables to pass through from the side, but this one allows cables to be routed from the front, back, left, and right by placing two units vertically side by side as shown in the photo. Some commercially available products have holes on the side or top, but it is difficult to pass cables through the holes, and there is a greater risk of disconnection. This mini pedal riser is very easy to use because you can place it after wiring the cables. In addition, you can use it in various ways by raising the height of the junction box to prevent interference with the edge of the board, and by freely changing the placement. For raising the height of compact effectors such as Boss, Ibanez, MXR, Providence, One Control, Mooer, etc.! Since this is a handmade product, there may be some scratches, dirt, paint unevenness, etc. Size: W45 x D70 x H25 mm (excluding Velcro) Weight: Approximately 120g Material: Steel #Zico's Pedal Riser #Pedal Riser #Effector