XLR (Cannon) cable, 0.5m-1m, 1 piece. Uses Oyaide cable (PA-02 V2) and Neutrik gold-plated plugs. The following changes are possible, so please let me know in the comments: 1. Length change You can choose from a range of 0.5m to 1m. 2. Plug change. You can change one or both sides to TRS plugs. TRS uses Amphenol gold-plated plugs. * About the cable Uses Oyaide PA-02 V2. ~ Quoted from the manufacturer's website ~ The structure of PA-02 V2 adopts a 2-core shielded traditional design, considering not only audiophiles but also professional use. For the conductors, Oyaide Electric's precision conductor 102 SSC is used not only for the 2-core signal lines but also for the braided shield. PA-02 V2 has quality and ideas that transcend the realm of entry models, and is the ultimate synonym for cost performance. * About solder Uses OYAIDE (Oyaide) SS47-50. ~ Quoted from the manufacturer's website ~ OYAIDE's audio-specific solder was developed with the motto of making the most of the individuality of each part, such as cables and connectors. Compared to ordinary solder, it uses tin (tin) with higher purity. In addition, 4.7% pure silver and 1.7% copper, which has the second highest conductivity after silver, are blended to maximize the characteristics of the materials used. * About length This is the length when the cable is cut. Please note that there may be an error of a few centimeters due to manual work. * Other After production, we will check the operation with a tester, oscilloscope, level meter, etc., and ship it in basically 4 to 7 days. Please note that it may take some time depending on the stock status of the parts. Please also check the profile. #Mixer #Effecter #Compressor #EQ #Sampler #AudioInterface #PatchBay #Speaker #TRSBalancedCable #Mixer #DJ #Synthesizer #YAMAHA #MOTU #SSL #RME #Focuslite #Roland #MPC #KORG #ADAM #MOGAMI #Mogami