This is a clone pickup set designed based on the FENDER Custom Shop Fat '60s, emulating the late 60s style. It's tuned with a focus on a moderately fat and thick mid-range, and a vintage-like, clear high-end, making it particularly easy to handle in the clean to crunch range. Alnico magnets are used for a warm and natural response without being overly sharp. This configuration aims for the so-called "FAT 60s sound." The middle position is RWRP (Reverse Wound Reverse Polarity) for hum cancellation in half-tone positions. Neck ・DC Resistance: 6.0kΩ Middle (RWRP) ・DC Resistance: 6.0kΩ Bridge ・DC Resistance: 6.2kΩ ※All are configured with slightly higher output values, typical of the FAT 60s style. Structure/Specifications ・Magnet: Alnico 2# ・Pole piece spacing: 2-1/16 inches (52.39mm) ・Pole piece diameter: 3/16 inches (4.76mm) ・Mounting screw spacing: 3 inches (76.2mm) Recommended for: ・Upgrading Strat-style guitars ・Those who want to easily try the FAT 60s sound ・Players who prioritize clean to crunch tones ・Those who like vintage-leaning tones These are not mass-produced items, but are handmade by individual builders, so there may be slight individual differences. Please understand this as a characteristic of individually made products. Notes: ・This product is a self-made pickup produced by an individual builder. ◎The color of the bobbin on the back may be gray or black, but both are made of the same fiber material, so there is no difference. Please understand this beforehand.