※ Returns and refunds due to the buyer's circumstances after shipping (e.g., didn't read the description carefully, no longer needed) are not possible. Thank you for your understanding. [Description] I purchased a Fender Mexico Player II Stratocaster in June 2025 and used it for about 3 months. The product itself had no problems, but I replaced the bridge with a Gotoh bridge (510TS-BS1) to adjust the sound to my liking, so I am selling the original. There is only one modification: an arm tension spring made by MONTREUX has been installed in the tremolo arm socket. Other than that, the tremolo springs and spring claw are all genuine Player II Stratocaster parts. Although there is no dimensional chart on the Fender official website, the stud spacing seems to be 56mm and the string spacing is 10.5mm. [Contents] ・Tremolo unit body (including saddles and inertia block) ・Anchor and stud bolt set ・Tremolo arm ・Tremolo springs (3) ・Tremolo spring claw (including screws) ・Inch-size Allen wrench [Notes] ・This is a 2-point bridge, so it will not fit a Stratocaster with a 6-point tremolo. ・Since this is a Fender Mexico part, it is basically designed in inch scale, so processing or adjustment may be required for your guitar. If you are unsure about compatibility, please contact Fender for dimensions, etc. ・Due to size constraints, the inertia block will be shipped separately.