SHARP Humidifying Ceramic Fan Heater HX-J120 Humidification Capacity: 540/520mL/h (50/60Hz) Power Consumption: Maximum approx. 1200W Plasmacluster Applicable Floor Area (Estimate): Approx. 6 tatami mats (approx. 9.7 square meters) Tank Capacity: Approx. 2.7L Power Cord Length: Approx. 1.8m After operation stops, the humidifying filter is automatically cleaned. It suppresses the adhesion of water scale to the filter and tray cover, and also prevents cloudiness of the water in the humidifying tray, keeping it clean. During humidification and after operation stops, water pumped up by the water supply pump is sent to the humidifying filter. Excess water falls into the humidifying tray, so the humidifying filter does not get submerged in water, keeping it clean. It is easy to disassemble and clean. It delivers clean warm air and moisture. Equipped with Sharp's unique air purification technology, Plasmacluster 7000. An Ag+ ion cartridge can be attached to the cap of the water supply tank. It suppresses bacteria in the water that cause slime and odors in the tray, and by replacing it approximately once a year, cleanliness is maintained. Eco operation using temperature and humidity sensors, with W sensors, maintains comfortable warmth. The operation automatically stops 12 hours after pressing the operation button. There is no worry about forgetting to turn it off. This mechanism stops the power supply if the unit falls over or tilts due to an earthquake, etc. Unlike a push-bar type, it is built into the main unit, so it will not be re-energized unless you pick up the product and press the operation button after it falls, providing peace of mind.