This is a modification kit for WPL JAPAN RC car C74-1 Jimny to make it easier to remove and attach the body (with instructions). ※ This sale includes the parts shown in the second image and the instruction manual. ※ Cannot be installed on C74 (van-type Jimny). ※ May not fit vehicles with aftermarket bumpers. Please check the third image and later. This kit changes the body shell attachment method to a clip-on design for easier maintenance and part replacement, allowing for quick (in a few seconds) removal and attachment with just one or two actions, without the need for tools. 【About the Material (Layered 3D Printed Parts)】 ・Material: PLA, Black ・Due to the nature of FDM (layered) printing, there may be layer lines (unevenness), stringing, and burrs on the surface. ・Please note that this material is not suitable for polishing or painting, and the surface is not as smooth as a mass-produced product. 【About Durability】 We have confirmed that there are no problems during installation and use, but this is not guaranteed in cases of deterioration or negligence. 【Please Read Before Purchasing】 ・May not be compatible with vehicles that have modified basic structures or internal body parts (such as the floor). Please check the product images. ・Please be aware that as a resin product, there is a possibility of deformation or damage under certain circumstances, even with proper use. ・C74 (van-type Jimny) cannot be installed due to some differences in shape.