Type: Electric Guitar Thank you for viewing. This is a custom ESP model. - The fingerboard is rosewood, and the body is likely alder. (It also gives off a vibe similar to Brazilian rosewood) - Cyber Joint - The recessed PU escutcheon and bridge allow for a very low string action setup. This model uses a costly construction method that is rarely used nowadays, especially the Cyber Joint. It was conceived as an alternative to a through-neck, but it was short-lived because of its poor wood usage efficiency and the labor-intensive process. It offers the playability of a through-neck, and because the bridge springs pull on the neck, it has a strength different from a bolt-on, despite being a bolt-on. The neck is thin and wide, reflecting the era it was made. It was likely made before 2000. Given the labor-intensive construction mentioned above, it was probably quite expensive. The frets are about 70-80% remaining, and the neck condition is not bad. There are minor scratches on the headstock and a paint crack about 8mm long on the lower back. There are other small dents and scratches, but it is in very clean condition considering its age. It features a 3-way control and two Duncan pickups. It will be shipped in a generic hard case.