Finger ramp compatible with 60s style Jazz Bass. Made of high-transparency acrylic, it maintains the bass's appearance and provides a high-quality feel. Commercially available acrylic finger ramps often cost around 10,000 to 20,000 yen, but our shop offers the same quality at an affordable price. ■ Size • Width 92mm × Height 72mm • Distance between pickup mounting screws: 38mm on the front side, 40mm on the rear side • Semi-circle of screw holes: Diameter 13mm • Spacers: 2mm and 3mm thick included ※ Lefty (left-handed) compatible (free of charge) Please let us know via message after purchase if you wish. All troublesome tape cutting and application work is completed before delivery. Once you decide on the spacer thickness, simply peel off the release paper, stack them, and press firmly with your fingers to adhere. We use two types of tape depending on the application. ① Between the main body and spacer: 【Ultra-thin transparent tape】 To make it look beautiful, like a single board, when stacking spacers for height adjustment, we use ultra-thin tape that makes the adhesive surface less noticeable. ※ After applying, pressing firmly with your fingers (pressure bonding) will remove air bubbles, increasing transparency and integrating with the acrylic. ② Body adhesive surface: 【1mm thick transparent tape (recommended)】 We usually apply a stable 1mm thick tape before delivery. ※ This is because the thickness creates a physical clearance (gap) between the edge of the pickguard, allowing for secure adhesion without interference even with minor steps or tilts. ■ Compatibility ※ The images shown are examples of installation on a "Fender Made in Japan Hybrid II Jazz Bass". Please be sure to check the size before purchasing. Please feel free to contact us if you have any questions.