BANDAI Can Badge Good Super! Main Unit 2.5cm Badge Adapter + (Materials for 78 badges) 3cm Badge Adapter + (Materials for 147 badges) 4cm Badge (Square) Adapter + (Materials for 74 badges) Photo Seal Badge Adapter + (Materials for 70 badges) Dedicated Safety Pin Fittings for 370 badges Dedicated Circle Cutter (for 3cm badges) - Makes cutting easy! Since there are a lot of can badge materials, you can make lots of badges of your favorite things with your kids just with this. By the way, the main unit costs 4950 yen. Additional adapters cost 2600 yen. Just the additional materials alone easily exceed 20,000 yen, so it's a great deal. It's also easy to make original goods of your favorite characters. Adapter Replacement 1. Check if the memory on the side of the tray is at position 1 (if not, return it with the upper handle). 2. Remove the adapter from the front of the tray (it won't come off from the back). 3. Set the adapter upper part on adapter ① and insert it from the front. 4. Insert until it clicks. 5. Turn the handle until the tray side memory is at 2. 6. Return to memory 1 once, then pull the tray forward and confirm that the upper part is set in the main unit (this completes the preparation).