Thank you for viewing! This is a shade specifically for the BAREBONES Mini Edison Lantern. I think it makes it even cuter when attached. Leather used: Cowhide split (the flesh side of cowhide, without the grain) Thickness: 1.5mm Color: Natural *Because natural leather is used, there may be some scratches, wrinkles, and veins. Thread color: Beige Photo 4: Remove the four cap nuts (A 5.5mm wrench is required) Photo 5: Attach the shade to the bolt part Photo 6: Tighten the nuts and hold them in place. It's difficult to tighten the nuts due to the thickness of the leather, but please do it straight and carefully. (5.5mm wrenches are also sold at 100-yen shops) Photo 9: When attaching it by simply covering it, push the hole of the shade into the cap nut. Attaching a magnetic sheet (magnet) will make it look good. I make it carefully by hand sewing, but please understand that this is a handmade item by an amateur. If you have any questions, please feel free to ask. I hope you enjoy the aging process and use it with affection. *The Mini Edison Lantern in the photo is not included, only the shade. *We are not responsible for any damage during the installation of the shade. Thank you. #leather #leathercraft #leather #camp #solocamping #outdoor #leathercraft #handmade #BAREBONES #berebones #MiniEdisonLantern #lantern #shade #bar #BAR #cute