This product is fully compliant with Japanese power outlets. (There are similar products with asymmetrical plugs) The plug shape is symmetrical, so there is no restriction on the direction of insertion, and it can be used in any outlet. This is a lightweight and easy-to-use embossing heater. The color combination is black/red. This embossing heater (heat gun) is useful in various situations, such as removing bubbles from resin, heat shrinking shrink wrap, repairing smartphone screens, and handicrafts. It reaches a maximum temperature of 200°C in a matter of seconds, making it easy for beginners to use. It is small and weighs about 220 grams, about the same weight as a recent smartphone, so it is easy for women to handle. In addition, the hot air outlet uses high-strength stainless steel, so it is extremely durable. Examples of use ・Use on heat shrink tubing ・Heat processing of PVC and acrylic ・Removing bubbles from resin ・Embossing ・Drying paint and putty ・Smartphone screen repair ・DIY etc... How to use 1. Plug the power cord into an outlet 2. Turn on the main switch 3. Wait for hot air to come out (about a few seconds) 4. Turn off the power after use Product Precautions ・Do not use continuously for more than 10 minutes. ・Do not place it directly on a desk, etc., but use a metal stand to keep the contact surface and the main body separate. ・Wait until it cools down after use, as it will be hot for a while. ・Do not use it near flammable materials such as gas canisters. Product Specifications ・Size: Approximately 22cm in length (air outlet 2.5cm) ・Weight: Approximately 220g ・Maximum temperature: 200°C ・Power consumption: 300W ◆Regarding returns and exchanges If you have any problems, please contact us before evaluating the product. We will respond sincerely, so please purchase with confidence. No. 3012-G430