This is a speaker cable for a guitar amplifier. There are minor scratches and dents on the surface of the cable, and slight scratches on the connector parts, but it is in good condition for a used item. There are no functional problems. Phone-Phone 75cm The following is a quote from the manufacturer's website: Thick speaker cable! By combining three wire diameters, Φ0.1, Φ0.3, and Φ0.9, in the cable conductor, a flat response is achieved from ultra-low to ultra-high frequencies. Furthermore, a total of 259 conductors, consisting of Φ0.1 x 252, Φ0.3 x 6, and Φ0.9 x 1, achieve a conductor resistance of 7mΩ/m. This low conductor resistance not only transmits the amplifier's power to the speaker without loss but also responds quickly to the instantaneous sound onset during picking. Of course, oxygen-free copper (OFC) is used for the wire. In addition, it is very important not to emit radiated noise, which is one of the requirements for speaker cables, and Ex-pro takes thorough measures by applying a carbon shield to the entire inner circumference of the sheath. Also, to obtain pure sound quality, it is important not to generate static electricity noise, and this is solved by using natural cotton thread instead of the generally used polymer materials for the filler. Furthermore, the cotton thread filler absorbs and disperses conductor vibrations, preventing coloration of the sound due to natural vibrations.