This is an embroidered iron-on patch of a crown. m(_ _)m It's a beautiful patch with a lovely blue gradient. Crown size: Approximately 7cm (height) x 10cm (width) *Iron-on adhesion is not possible on waterproof or water-repellent materials. 1. Temporary Adhesion Place the material you want to attach the patch to on a flat surface. Cover the patch and the material with a thin cloth (like a handkerchief or gauze) to protect the material. Iron over the cloth for 10-20 seconds with medium heat, applying weight. Be careful not to damage the material with heat and adjust the pressing time accordingly. *Please be especially careful with thin polyester and nylon materials. They are sensitive to heat and may melt. The patch may peel off while it's still hot after ironing, so wait for it to cool down and check if it's securely attached. If it peels off, the adhesion is incomplete. Increase the ironing temperature and time. 2. Permanent Adhesion Iron from the back of the material you are attaching the patch to. Remember to use a cloth as a protective layer and apply firm pressure. If the material is thinner than the patch, this step is more effective as the heat directly reaches the adhesive film. *Iron-on adhesion is not a 100% permanent attachment method. We recommend sewing the patch on in addition to ironing for a more secure attachment. While carefully made, please understand that as this is a handmade item, there may be slight imperfections or variations. We appreciate your understanding of handmade products before purchasing. m(_ _)m Motif: Cross Parts: Patches, decorative materials