AINEX U32AC-MFAD This is a set of two adapters that convert USB-C cables to Type-A connectors. One is unopened, and the other is opened but only the main unit. There are no noticeable scratches, stains, or damage, and they function without any problems. 【Manufacturer's Description】 Allows you to connect a USB Type-C (USB-C) cable to a computer with a Type-A port. Supports 10Gbps. ■ Allows you to connect a USB Type-C (USB-C) cable to a computer with a Type-A port. (Does not support reverse connection.) ※ Connecting the Type-C side to the host (computer/smartphone) and the Type-A side to the peripheral device will not work correctly. There is no problem connecting the Type-C side to a computer/smartphone and the Type-A side to a USB power supply. ※ The combination of a smartphone/tablet and an eMarker-equipped C-C cable with this product will not work. This is because it cannot recognize which side is the host. Apple's genuine C-C cables have eMarkers built-in. (Not all Apple products have been confirmed) ■ You can effectively utilize your existing USB cables. ■ You can connect a computer to a smartphone/tablet with Type-C, or connect a USB power supply. ■ Supports high-speed data transfer of 10Gbps. (Theoretical value) ※ Due to the structure of Type-C, the transfer speed will be either 10Gbps or 480Mbps depending on the orientation of the Type-C connector. If you feel that the transfer speed is slow, reverse the orientation of the Type-C cable connected to this product. ■ Supports charging up to 1.5A. (The supplied current value depends on the performance of the connected device) ※ The supplied current value depends on the performance of the connected device. ■ Equipped with a 56kΩ resistor to prevent overcurrent exceeding 1.5A. ■ Type-C is a reversible connector that can be connected regardless of the top and bottom orientation. 【Caution】 ・This product is a general-purpose product and does not guarantee operation in all combinations. ・Does not support USB PD (Power Delivery).