☆NEW Item Release Commemoration Campaign☆ Limited-time sale price!! ★Further Evolution★ Shortened to the limit for a completely clear view! ☆New Color: Gray☆ Blends in with the room mirror and interior colors. Jimny Sierra JB74 Room Mirror Short Stay 31mm Upward This part dramatically improves the narrow forward visibility, which is a drawback of the Jimny. By raising the 31mm room mirror, the field of vision widens, providing a sense of openness and safety♪ Also, the mirror is less noticeable from the outside, resulting in a smart style♪ You can use the original mirror as is just by replacing the stay. JB74 Exclusive ※ To ensure usability even in the high temperatures of a car interior in summer, it is made with a 3D printer using high-quality ABS filament that is resistant to heat and impact. Jimny JB64 cannot be installed! 【How to Replace】 ① Remove the cover at the base of the mirror with an interior panel remover or clip remover to avoid scratching the interior. ② Remove the two screws at the base of the original stay with a size 3 Phillips screwdriver (if you only have a size 2, press the screwdriver firmly and be careful not to strip the screw heads). ③ After loosening the screw in the hole on the back of the mirror, hold the mirror part and the original stay firmly and pull them out. (If it doesn't come out, it's easier to remove by warming the connection between the mirror and the stay with a hairdryer, etc.) ④ Connect the short stay to the mirror. (If it's difficult to insert, warm the area around the mirror hole with a hairdryer, etc., to make it easier to insert) ⑤ Securely fix the stay with the two screws. ⑥ Close the screw in the mirror hole. (If it's loose, tighten the screw firmly and adjust) ⑦ Put the cover back on and adjust to a position that is easy to see. ※ Please be careful not to get injured during the work. #Jimny #Sierra #JB74 #RoomMirror #Short #JIMNY