New Version Magnetic Patch Mounting Plate for JB (Approx. 50mm) The new version is as light and strong as possible. *Please slide to remove. This is a product I made before, but I remade it because the JBC patch changed to JB, and I needed it myself. The size is (for approx. 50mm patches). The magnets are strong, so the patch will rarely shift or come off. I think many people attach JB and other patches with double-sided tape, safety pins, pin badges, etc. So, I made a resin plate that can be easily attached to the uniform with a super-strong magnet. Double-sided tape is attached to the surface of the plate, so please attach your patch and use it. The method of use is to sandwich the patch plate and the magnet from the inside of the uniform and attach it with magnetic force. It's easy to attach if you have a uniform with a chest pocket! The weight is about 6g, which is less than half of the conventional product, and it is very light. It is about 7g even with the JB patch attached. Images 1-4 are images of the JB patch attached. Images 5-8 are the products for sale. *The JB patch is not included in the product for sale. Reference size JB patch size (approx. 50mm) Magnetic plate size approx. 44mm Weight approx. 6g Addendum: In the summer when the temperature is high, the resin plate may soften and deform, but it will return to its original shape if placed on a flat surface and the temperature drops. Caution: Because the magnetic force is very strong, please be careful not to pinch your fingers. Also, please do not bring anything that dislikes magnetism close to it. We are not responsible for any problems that may occur. Shipping method: Yu-packet Post mini #Bowling #Patch #JB #JBC #Magnet #ConvenientGoods #Plate