Club Assembly, Reshafting, and Sleeve Installation Adhesive Cemedine Metal Lock (Made in Japan, Genuine Product) Y610 64g, Divided into 32 portions [Product Contents] 1. Two-Part Acrylic Adhesive Y610 NET. 64g (Cemedine Metal Lock) - Part A: 32g bottle - Part B: 32g bottle 2. Mixing sticks: 3 * When adhering the club head or sleeve to the shaft, 1g of Part A and 1g of Part B (mixing ratio 1:1) is the recommended amount. * When Part A and Part B are mixed, hardening begins after 5 minutes at 20°C. (Part A and Part B do not harden on their own, allowing for long-term storage) * The hardening time varies depending on the temperature, but the recommended working time for adhesion is within 3 minutes. * After adhesion, it hardens to the point where it doesn't move in a few tens of minutes, but it takes about 60 minutes at 20°C to reach practical strength. Please do not move it until then. (Hardening time is longer at low temperatures) * To fill the gap between the hosel of the head and the shaft, stabilize the adhesive strength, prevent looseness, and make it easier to center the shaft, it is recommended to mix approximately 0.1g to 0.5g of glass beads into the adhesive. * These glass beads have a well-formed particle shape and high strength, and can be used with both steel and carbon shafts, including the adhesive. [Optional Addition] Glass Beads (Made in Japan, particle size approx. 0.150mm) 5g: ¥100, 10g: ¥200, 15g: ¥300, 20g: ¥400, 30g: ¥600 * If you wish to add options, please contact us via the comment section before purchasing, and we will change the listing content. * For adding 20g or more of glass beads, an additional ¥20 for Click Post will be added. * For non-standard mail, there is no tracking or compensation, and there is no delivery on weekends and holidays. For those who wish to remain anonymous or are in a hurry, please request the following shipping methods: - Nekopos (anonymous, with tracking, with compensation) +¥40 - Click Post (not anonymous, with tracking, no compensation) +¥20 Please contact us via the comment section before purchasing, and we will change the listing content. * The club assembly method is based on YouTube videos such as "How to Make a Golf Club," "Today's Reshaft," and "Jumbo-tei Craft Videos." * Many people have purchased this product, and I have used it without any problems, but please use it at your own risk. * Please read the profile section.