【※Plate not included.】 This is an assembly for a Jazz Bass. Recommended for those who want to upgrade their current bass! Assembly Introduction 【Pots】 Entry-level basses, etc., have millimeter-standard holes in the plate. I considered CTS pots, which are famous for being good, but CTS are inch-standard and not compatible. Therefore, I chose Alpha pots, which are millimeter-standard and good. They are 250kΩ, a model that works well with basses. You can install them directly on your existing plate. This time, I made them with full-size pots. 【Jack】 I use a Japanese-made jack. The quality is quite good, and I feel it's not much different from Switchcraft. 【Wiring】 The wiring is cross-wire, which is also used in Fender and other high-end guitars. It's quite stiff and sturdy, so there's no need to worry about durability. ※Cross-wire will be either skin-colored or yellow. Basically, I make them skin-colored, but sometimes they are yellow. Please understand that there is no change in function. 【Capacitor】 The capacitor is the classic good-quality Orange Drop. Specs → 200V 0.047uf Even when the tone is applied, it doesn't sound muddy, and the sound has a clear core. As described above, I have created this with a focus on quality. All parts are new. I have grounded all the pots to reduce noise, so there is very little noise. Please feel free to upgrade. Please refer to photos 3 and 4 for pickup wiring methods and pot dimensions. Power-on confirmed. Shipping will be via Yu-Yu Mercari Mail A4 size brown envelope. If you are worried about wire breakage, etc., I can send it via Yu-Yu Mercari Mail Yu-Packet Plus for an additional 200 yen. I have kept the price as low as possible, so I cannot lower the price any further. #Bass