Thank you for viewing. This is a shelf for a toilet paper holder. It can also be used as a small display shelf or a smartphone stand. It is a stock type. ☆ For the stock metal fittings, pilot holes are pre-drilled, so please attach them with a Phillips screwdriver. Holes are drilled on both sides so that the metal fittings can be hung on either the left or right side. Top board size: Width: Approximately 22.5cm, Depth: Approximately 12.5cm, Board thickness: Approximately 1.8cm Insertion metal fitting width: Approximately 11.5cm (Photo 4), Distance from the wall to the insertion gap: Approximately 0.9cm (Photo 3). ◎ Double-sided tape is attached to the L-shaped metal fittings and the wood. ⚠︎ The installation position line for the above dimensions is marked, but it may not fit all holders, so please test it without removing the double-sided tape before installing. ※※※※※※※ Ivory Because the brightness is lower than white, it has a natural image. It has a calming color. ※※※※※※※※ The actual product and the photos may have different colors. We cannot provide individual support regarding material selection, so please understand. #ToiletPaperHolder #Handmade #MiniTable #ToiletSupplies