【Notice】We are closed every Wednesday. Delivered in a professional-use bottle that you shake! This is a professional-grade compound specifically for polishing automotive glass. Before use, please wash the glass surface to remove any dirt. Glass Polish-L (38055: 110g): Removes minor dirt and oil film from the surface of the glass without scratching it. Instructions: Remove any dirt from the glass surface before use. For a glass surface of approximately 60cm square, apply about 1-2 teaspoons to a Scotch-Brite/7760 type T pad and spread it well over the glass surface, then polish. Polish until the compound dries. Continuing to polish the same spot or applying too much pressure may cause distortion. *Image 3 is a usage example. Sponge and sander are not included. 【Important!】The polishing power of the compound is activated when it dries. Please be careful not to apply it thickly to the buffing pad like wax. Work slowly on small areas, using a small amount at a time. If you try to work all at once, you may be tempted to apply a large amount and polish a wide area, but this will reduce the polishing power of the compound and increase consumption. *Please be careful not to polish surfaces other than automotive glass, such as plastic or painted surfaces. Also, side mirrors are not glass surfaces and cannot be used. If the compound splashes on anything other than the glass surface, wash it off before it dries. *Since glass is highly hard, it takes a considerable amount of time and effort to manually polish scratches that catch your fingernails, so machine polishing is assumed. ■Delivered via Yu-Packet Post Mini.