■ Conductive Paint: Dotite FE-107 for Reducing Guitar Noise with Silver-Copper Composite Powder ■ Provides higher shielding performance than carbon-based paints. ■ Color: Brownish-Red ■ Applications and Purposes: Static electricity prevention, noise reduction, electromagnetic shielding, making non-conductive materials conductive, conductive primer. ※ Regarding noise reduction in electric guitars, a common inquiry: Noise such as "buzzing" and "humming" in electric guitars can be reduced by applying conductive paint inside the cavities. High-end guitars are often treated with conductive paint from the start, but for those that aren't, Dotite is recommended for noise reduction. After painting, before installing the bridge, be sure to check that the ground wire is in contact with the painted surface. Static electricity prevention and reduction through conductivity Electromagnetic noise countermeasures for plastic housings Noise reduction in electric guitars Internal noise shielding paint for audio equipment, OA equipment, etc. Test painting of conductive paint on test equipment housings Repair painting of missed areas or scratches in conductive paint on production lines Electromagnetic wave shielding paint for the inner surface of ABS cases Repair of remote controls whose responsiveness has deteriorated due to conductive rubber degradation ■ Expected to reduce radio wave noise from one-seg and full-seg broadcasts in drive recorders, and to reduce noise in electric guitars. ■ Does not guarantee all operations. ◆ Comes with a 20ml marble for easy stirring. ■ 5ml can cover approximately one postcard. Resistance: 5 x 10-4