Thank you for viewing! This is a 【Set of 2】: 《Standard Type》 and «Lightweight Type»! 《Standard Type》 ・Total Length: Approximately 310mm ※From the 1st support pillar to the Yaen tip: Approximately 200mm ・Support Pillar Height: Approximately 20mm (Main 2nd support pillar) ※All support pillars: Self-designed one-touch type ・Uses ultra-hard stainless steel wire: 1.0mm ・Pre-made barb: M x 2, L x 2, a combination of 4 pieces x 3 ・Weight: Total 0.8 go For progress: 0.3 go For jump assist & balance: 0.5 go ・Resistance plate: 0.3mm thick stainless steel plate used ・Chemi-hotaru attachment (Yes) «Lightweight Type» ・Total Length: Approximately 250mm ※From the 1st support pillar to the Yaen tip: Approximately 180mm ・Support Pillar Height: Approximately 20mm (Main 2nd support pillar) ※All support pillars: Self-designed one-touch type ・Uses ultra-hard stainless steel wire: 1.0mm ・Pre-made barb: M x 2 x 3 pieces ・Weight: For jump assist & balance: 0.3 go ・Resistance plate: 0.3mm thick stainless steel plate used ・Chemi-hotaru attachment (Yes) This Yaen's motto is: If it reaches, it will hook with a high probability! ※When they dislike the approach and resist... ※When the squid notices the Yaen and releases the bait (horse mackerel) and escapes... Even in such cases, it hooks "automatically". ※"Hooking Yaen" where you can enjoy hooking and getting a solid catch. This Yaen was completed through repeated trial and error and actual fishing, based on the idea of achieving both. The explanation of the Yaen will be omitted due to the limited number of characters m(_ _)m If you are interested... Please refer to the description of the 《Standard Type》. Because it is handmade, there may be variations in dimensions and some scratches. Although I work carefully, it is not a commercial product, so if you are looking for perfection, I recommend purchasing a ready-made product. My work is irregular, so replies may be delayed, but if you have any questions, please feel free to comment.＾＾ #YaenFishing #AoriIka (Spear Squid)