Thank you for viewing. ・Total length: Approximately 310mm ※From the 1st support pillar to the tip of the Yaen: Approximately 200mm ・Support pillar height: Approximately 20mm (Main 2nd support pillar) ※All support pillars: One-touch type, self-designed ・Ultra-hard stainless steel wire: 1.0mm used ・Ready-made return barbs: M x 2, L x 2, a composite of 4 pieces x 3 sets used ・Weight: Total 0.8 gou For progress: 0.3 gou For jump-up assistance & balance: 0.5 gou ・Resistance plate: 0.3mm thick stainless steel plate used ・Chem-firefly attachment part (Yes) This Yaen... If it reaches, it will hook with a high probability! is the motto. ※When they dislike gathering and resist... ※When the squid notices the Yaen and releases the bait (horse mackerel) and escapes... Even in such cases, it hooks "automatically". ※You can enjoy the fun of hooking and going for the hook... "Hooking Yaen" From such a dual intention, I repeatedly experimented and fished, referring to various Yaen, and this Yaen was completed. 《 ↓↓ Yaen explanation ↓↓ 》 ① Support pillar... Self-designed one-touch type. Just press the line from the top of the support pillar to the bottom, and anyone can quickly and easily attach it! ② Features... Slightly different from the general type of Yaen, it is supported by only one support pillar (2nd support pillar) and proceeds in a downward-sloping state. A Yaen that utilizes the characteristics of the "balance type Yaen", which quickly and smoothly performs the jump-up action by supporting it at one point like a balance. ② Gimmick... At the time of arrival, the momentum of sliding, the pulling of the gathering work, the line angle, etc., the 1st support pillar is pushed towards the 2nd support pillar, forcibly raising the hook tip with a gimmick, and the weight at the rear reduces the load of the action. ③ Action of the underwater resistance plate... For maintaining the jump-up during gathering and hooking. Furthermore, to prevent pressure loss on the hook tip. ④ Size and strength... From autumn new squid to spring parent squid (I had no problem even with a size of 1.8kg). It has the strength and size that can be used for all-around purposes. It will be a "Yaen specialized for jumping up". Because it is a handmade product, there are variations in dimensions and some scratches. I work carefully, but it is not a commercial product, so if you are looking for perfection, we recommend purchasing a ready-made product. Because my work is irregular, replies may be delayed, but if you have any questions, please feel free to comment.＾＾ #Homemade #Yaen fishing #Aori squid