3M Safety Walk Anti-Slip Sheet by Sumitomo 3M - Skateboards, Deck Slopes, Ladders, Steps... Endless Uses! *Cut and sold by the piece in 305mm x 850mm size.* The actual length is slightly larger than stated as a service! Waterproof, oil-resistant, with strong adhesive and high weather resistance. This is one of the top-rated products in Sumitomo 3M's Safety Walk series for weather resistance and resistance to peeling. ⚠️ Also for anti-slip on outdoor stairs, ladders, and ladder steps. For slopes, entrances, and walkways that are slippery due to snow or rain. Prevents falls and slips. Also for skateboards, ships, jet skis, etc... ● A copy of the easy-to-understand instruction manual will be attached. ● Considering use for skateboards, it will be cut to 850mm-1M and shipped folded carefully in a Mercari-exclusive box to prevent bending. Please note that slight bending can be corrected by warming with a hairdryer. ● Basically for flat surfaces, but it can be applied to gentle curves by warming with a hairdryer. I have used a heat gun to apply it to curved surfaces. ● Finishing with a hairdryer is recommended. If you have a heat gun, warming and pressing the edges during finishing will reduce peeling later. A hairdryer or heat gun is also recommended for reapplication and removal. ● Product Name: 3M Safety Walk Anti-Slip Tape Type B Gray Mineral Particles ● Contents: Width 305 mm x Length 850mm + α (cut to size). ● Anti-slip use: For safety, for outdoor and indoor use. ● As expected of 3M! Strong adhesive It adheres firmly even when applied to metal ladders, stair steps, granite, and marble. When removing a product used for a long time, it can be removed cleanly by warming with a hairdryer and slowly pulling it up. Cutting can be done with a cutter knife using a ruler and a cutting mat, or with scissors. ● [Uses] Concrete, general metals, hard plastics, floors, slopes, stairs and steps, iron stairs, walkways, tiles, iron plates, stone materials, etc... #AntiSlipSheet #DeckTape #GripTape #NonSlipTape