Serviced Singer Computer Sewing Machine SN777-n With foot controller and wide table (If you don't need the foot controller, we'll deduct 2,000 yen) Each part has been oiled, inspected, and maintained for comfortable sewing. It can easily sew through 10 layers of 11-ounce denim, and by weakening the thread tension dial from the standard setting, you can also sew thin fabrics like organza beautifully! All accessories are shown in the images. (Threads and fabric are not included) 【Abundant Pattern Stitches】 80 kinds of patterns can be sewn, expanding the range of your sewing. 【Quick-Set Horizontal Bobbin】 The bobbin case is not required for the lower thread, just insert the bobbin from above and hook the thread into the groove. Also, it's a quick-set bobbin that saves the trouble of pulling up the lower thread. 【Automatic Needle Threader】 Threading the needle is quick and easy. (Please use needles size 11-16) 【Automatic Buttonhole】 Just set the button on the presser foot, and you can make a buttonhole of the perfect size. 【Free Arm】 Convenient for hemming trousers and sewing cuffs. 【LED Light】 Equipped with an LED light that doesn't get hot even after long use and saves energy. 【Needle Up/Down Stop】 At the end of sewing, the needle always stops at the top, so you can take out the fabric immediately after raising the presser foot. (Can also be switched to needle down stop) ☆Accessories☆ Overedge foot, buttonhole foot, zipper foot, satin stitch foot, blind stitch foot, button sewing foot, triangle screwdriver, seam guide, small screwdriver, 3 bobbins (1 set in the machine), spool holder (large) (small), auxiliary spool pin, ripper brush, spool pin seat, needles (3), instruction manual copy, power cord, foot controller, wide table, sewing machine cover Width 40.4 x Depth 18.8 x Height 29.8 (cm) Weight: Approximately 5.8 kg