■ This is a listing for a wooden stand compatible with the Russell Hobbs electric salt & pepper mills (7921JP, 7922JP, 7923JP). ■ The mill本体 is not included. ■ The rectangular (square design) makes it easy to hold with your fingertips without slipping, and easy to lift and move. ■ If the maximum diameter of the bottom of your mill本体 is 60 mm or less, it can also be used with mills from other manufacturers. ■ The depth of the hole is approximately 3 cm. It exhibits excellent stability, so there is no need to worry about it tipping over even if tilted slightly when moving or carrying. ■ Non-slip cushion base: Silicone non-slip bases are attached to the four corners of the bottom to prevent damage to tables and countertop surfaces. ■ Size: 158 mm (length) x 83 mm (width) x 33 mm (height) (including the non-slip silicone cushion on the bottom) Inner diameter of the hole: 62 mm Depth of the hole: 29 mm ■ Materials used: Made of solid black walnut, one of the world's three major precious woods. ■ Finish: After applying 100% pure walnut oil and completely drying, Wood wax [wood food wax] made from natural beeswax, organic coconut oil, and high-purity food-grade mineral oil is applied for the final finish. (See the last photo) Of course, MADE IN JAPAN quality. ■ Precautions for use: When dirty, wipe with a lightly dampened cloth, towel, or paper towel, and then dry in the shade. Do not use a dishwasher or dryer. When the surface of the wood becomes dry, apply commercially available flaxseed oil or walnut oil, etc., to the point where it is not sticky. ■ Please read carefully: This is an all-handmade product. Please refrain from purchasing if you are concerned about slight processing marks or imperfections. Please understand the characteristics of solid wood (although there is a slight possibility of warping or cracking) before purchasing. Material...Wood