Ibanez premium RGT1221PB - Heavily Modified - Non-Tremolo, Stainless Steel Frets, Upgraded Luminlay, Rear Direct Switch Please refrain from comments regarding price reduction. I will upload photos of any areas you request. I relist periodically to filter out those without purchase intent. Weight is 3.15kg, measured with a weight scale, making it lightweight. The following modifications result in playability and sound that are incomparable to the original. The Luminlay was dim, so it has been changed to 3mm diameter blue. In the process, the paint on the 5th and 9th frets became thin and whitish. Clear coat has been applied over the thinned areas. The pickups are secured with M2 anchors in the cavity and M2 stainless steel screws. M2 washers are used to secure the pickups for direct mounting, as the pickup screws are larger. Height adjustment is done with a 1.5mm hex wrench. This allows for future pickup changes without expanding the screw holes on the pickup side. The ground is concentrated to one point with a ground lug in the cavity. The strap pin on the neck side broke, so there are repair marks from removal. Wrenches etc. are in the gig case pocket. Due to the thin poplar veneer on the surface, there are fine scratches and dents. Stainless steel frets, so fret wear is minimal. The pots have been replaced with BURNS for both Vol and Tone, with the Vol being a smooth taper. The dyna-MIX10 has been removed and replaced with a 4-circuit, 5-position mega switch. (The switch alone is now worth over 5000 yen.) The selector positions are, from the rear: rear humbucker, rear/front coil tap mix, rear + front, front parallel, front humbucker. The mini-switch, when flipped up, bypasses the vol and tone, and activates the rear humbucker, acting as a rear direct switch, regardless of the selector position. Type... Soloist/Dinky type Color... Black系 (Black-based)