【Get the same effect as a Speed Master Bearing for less than 1/4 of the cost!】 Recent low-priced drum pedals are simple and easy to use, without adjustment mechanisms that confuse beginners, but unfortunately, the spring roller is still the old-fashioned resin ring. In fact, the part with the greatest friction resistance in a drum pedal is this spring roller section, and replacing it with a bearing dramatically improves the pedal's movement. However, you might hesitate to spend 7,000 yen (14,000 yen for a twin pedal) on a low-priced pedal to install a Canopus Speed Master Bearing (formerly Speed Star Bearing). So, we created these grooved bearings. They have a simple shape, just the outer ring of an NSK stainless steel bearing with a groove cut into it (*), and because they don't have a heavy bearing holder like the Speed Master Bearing, the inertia is smaller, and the movement is more agile. They can be installed on the following models: Pearl P-1030 series (Eliminator Solo) Pearl P-930 series Pearl P-920 series YAMAHA FP7210A YAMAHA FP6210 TAMA Camco (reproduction HP35B) Other models may also be compatible. Please inquire in the comments. ★Here's a video comparing before and after replacing the bearings: https://youtu.be/f0UEkBX1t_0 ★Here's a video showing that our bearings have the same low friction as Speed Master Bearings: https://youtu.be/i2p9vLpm7tg ●If you want multiple bearings for a twin pedal, etc., please comment. (*) Although the outer ring of the bearing has been cut, the necessary strength for a spring roller is ensured. speedstar bearing speedmastar bearing