Thank you for viewing. This is a newly released product. This product is a mount for attaching the SESAME 5 PRO (Sesame 5 Pro) with magnets. The SESAME 5 PRO unit itself is not included. This product is custom-made after you provide the height of your thumbturn. After purchase, please specify the height from the door surface to the top of the thumbturn in 1mm increments on the transaction screen. (Standard production range: 25mm-55mm; for other ranges, an adapter may be required, so please consult before purchasing.) By using this product, you can install the SESAME 5 PRO vertically or horizontally using magnets. Large and powerful neodymium magnets (with yoke) are used, so it will firmly adhere to the door. It will not shift even during the locking and unlocking operations of the SESAME 5 PRO. It is designed so that you can replace the batteries while it is installed. It can be easily removed, making it recommended for rental properties. 【How to Measure Dimensions】 Measure the height from the door surface to the top of the thumbturn with a ruler or calipers. If the height is difficult to measure, match it to the roughly measured dimensions, cut out cardboard, and apply it to the thumbturn to confirm the height. (To prevent contact between the Sesame 5 Pro and the thumbturn, we will manufacture it with a 3mm gap.) In the unlikely event that there is a problem such as the dimensions not fitting, we will remake it at the minimum Mercari price, so please feel free to contact us. 【Installation Method】 Attach the double-sided tape included with the SESAME 5 PRO to the mount. Align the center of the thumbturn and the rotation center of the SESAME 5 PRO, and install it on the door. - Model: SESAME 5 PRO - Material: Biomass plastic - Mounting method: Magnet - Installation examples: Vertical and horizontal installation possible ※Caution ・Please check in advance that the magnet will stick to the door. It cannot be used on aluminum or wooden doors. ・This product is made by a 3D modeling machine. There is no problem in use, but it will not have the strength and finish of a general injection-molded industrial product. Some unevenness and layer marks may occur. ・It softens at 60 degrees Celsius or higher. We do not recommend using it in direct sunlight or in places with high temperatures. Smart Lock Candy House