【Instructions】 (1) Remove dirt from the painted surface, and if necessary, sand it with sandpaper. (2) As a guide, the ratio is approximately 4 parts Shin Urushi to 1 part Fugu-jirushi Thinner, about the consistency of a medium-thick sauce. (3) Take an appropriate amount of Shin Urushi into a paint dish and thin it appropriately with Fugu-jirushi Thinner. (4) Soak the brush moderately, and wipe off excess paint on the edge of the paint dish. (5) Apply the paint thinly in the same direction as much as possible. (6) When drying, keep the painted surface as horizontal as possible to prevent the paint from dripping, and place it in a dust-free place. (24 hours or more) (7) After sufficient drying, lightly sand with waterproof sandpaper. (8) Repeat the above painting process 2 or 3 times. The more times you apply, the more beautifully it will finish. Contents (approx.): 10g * Due to the manufacturing process, the included gold powder may adhere to the Urushi tube, but there is no problem with the quality. (Precautions for use) Due to the properties of Urushi lacquer, it may rarely cause a rash if it comes into direct contact with the skin. Always use gloves when using. * The actual color of the paint may differ depending on your usage environment. Please understand. Fugu-jirushi Shin Urushi Thinner. Contents (approx.): 50ml Add 20-30% to the Urushi lacquer and use after slowly stirring. It makes it easy to adjust the viscosity and makes it very easy to apply. ★ Please contact us if you want multiple items.